EKF failsafe drone flew away uo to 150 meters! - Flight stack - Emlid Community Forum

Navio2 Image and ArduPilot version. Raspbian image 20180525 Arducopter 3.5 Mission Planner 1.3.68 Frame: DJI S1000 Hi Our drone was near to landing when it suddenly climbed to 150m and then fell to the ground. First of alla, we had several problems for getting accel calibrated, but after repeating the process several times we though it was solved. GPS was fixed and drone let us arm, so we started flying. Drone was flying as usual (loiter mode) and I was close to land when it just climbed

(Flight Modes 10) failsafe (throttle failsafe) & RTL (Return To Launch

Electronics, Free Full-Text

EFRW QRP Antenna Long Wire 9:1 – Tufteln

DJI Mini 3 Vs DJI Mini 3 Pro – heliguy™

Flight Modes 10) 😲failsafe 😲(throttle failsafe) & RTL (Return To

EKF failsafe, change IMU, crash with flip - Copter 3.6 - ArduPilot

Reach M2 FIX and FLOAT SOLUTION - Drone data processing - Emlid

EKF altitude measurement failure · Issue #7119 · ArduPilot

EKF failsafe drone flew away uo to 150 meters! - Flight stack

Reach M2 FIX and FLOAT SOLUTION - Drone data processing - Emlid

Pixhawk EKF is Red, LED Double flashing yellow - Copter 3.6

EKF altitude measurement failure · Issue #7119 · ArduPilot

DJI Mini 3 Vs DJI Mini 3 Pro – heliguy™