XTR Powder Painted PEI Flexi Plate - 258 x 258 - Bambu Lab X1, X1

Size: 258 x 258 mm / 10.15" x 10.15" *Fits: Bambu Lab A1, X1, X1 Carbon (or X1C), X1E, P1P, and P1PS *May fit: Two Trees SK1 (exact fit but without alignment tab) We start with our thicker (0.6 mm) XTR, high-chromium spring steel Flexi Plates, powder paint them with Ultem brand PEI coating and bake them in a kiln. Th
Size: 258 x 258 mm / 10.15 x 10.15 *Fits: Bambu Lab A1, X1, X1 Carbon (or X1C), X1E, P1P, and P1PS *May fit: Two Trees SK1 (exact fit but without alignment tab) We start with our thicker (0.6 mm) XTR, high-chromium spring steel Flexi Plates, powder paint them with Ultem brand PEI coating and bake them in a kiln. The PEI Powder Painted Flexi Sheets have a pronounced texture and give the bottom of your part a fantastic finish! The plates are coated on both sides, so you can save one side for pristine parts while you abuse the other side. Works perfectly with your Wham Bam magnetic base, not included. Works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use purple glue sticks or Magigoo, they will wash off with water after use. To clean, use some isopropyl alcohol after each use to keep contaminants away. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol. For PLA and PETG we recommend 70° C bed temperature. *Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume. Wham Bam is not responsible for mistaken order sizes. **It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.

Prints easily pop off once cooled and flexed. Our PEX build surface is 0.35mm thick and pre-backed with 3M adhesive so it takes seconds to install.

PEX Build Surface - 258 x 258 - Bambu Lab X1, X1 Carbon (or X1C), X1e, P1P, and P1PS

RETUXEP 3D Printer PEI Build Plate 257x257mm

Build plates anyone? : r/BambuLab

PEI for Bambu Lab X1

Stop working with resin on cardboard and paper towels, throwing away a toxic gooey mess after every clean-up or resin transfer. Use Slap Mat to protect your work surface, spill and splash all you like and when you are done, take it outside. The resin will harden, and with a simple flex, it pops right off to be safely and easily disposed of. Use under each of your printers as a catch-all.