Second test with the Siraya Tech Navy Grey resin and the Elegoo
![Second test with the Siraya Tech Navy Grey resin and the Elegoo](https://i.redd.it/second-test-with-the-siraya-tech-navy-grey-resin-and-the-v0-acpinxeqk9v81.jpg?width=3024&format=pjpg&auto=webp&s=79363d8ac783d82f7c177fa498241079b4edfb51)
![](https://m.media-amazon.com/images/I/61vXdu8eQkL._AC_UF350,350_QL80_.jpg)
Siraya Tech Fast ABS-Like 3D Printer Resin, High Precision, Non-Brittle - Low Odor 405nm UV-Curing Photopolymer for 8K LCD/DLP Printing (Navy Grey, 2kg) : Industrial & Scientific
Siraya Tech users group, Here is the test for SIRAYA Fast Navy Grey that was recommended by SIRAYA Tech
Siraya Tech users group, Siraya Navy Grey, first at .02mm with 2.4s exposure on Photon Mono 4k
![](https://m.media-amazon.com/images/I/61WckiES4RL._AC_UF1000,1000_QL80_.jpg)
Siraya Tech Fast ABS-Like 3D Printer Resin, High Precision, Non-Brittle - Low Odor 405nm UV-Curing Photopolymer for 8K LCD/DLP Printing (Navy Grey, 2kg) : Industrial & Scientific
Siraya Tech users group, Hello all
![](https://blog.honzamrazek.cz/wp-content/uploads/2022/01/failures-1024x562.jpg)
Prints not sticking to the build plate, layer separation, rough surface, elephant foot: resin viscosity – the common denominator – mind.dump()
![](https://m.media-amazon.com/images/I/71IvJHcWR7L.jpg)
Siraya Tech Fast ABS-Like 2kg 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing(Grey, 2kg) : Industrial & Scientific
Siraya Tech users group, Hi all, I've been trying to find the right exposure time and I think I'm pretty close at 1.6 seconds
Siraya Tech users group, New here… Running the test Model on my Saturn 3 …I think this came out pretty good .
![](https://i.redd.it/3lt70yqyasi91.png)
Ahh, Saturn 2 is still printing perfectly at 1s exposure, what do I do? : r/ElegooSaturn