Stainless Steel Push-Button Enclosures

Application Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil. Finish ANSI-61 gray

NEMA Type 12 Steel Pushbutton Enclosures for 22mm & 30.5 mm Push Buttons

Push Button Station Excalibur Enclosures

Allen-Bradley 800R3HZ4 Push Button Enclosure

6 x 4 x 4 Inches Push Button Fiberglass Enclosure, 4 Cover Screws Lift Off Cover 2 Holes 30 mm, Need holes, custom windows, or digital printing?,

6 x 4 x 4 Inches Push Button Fiberglass Enclosure CF2PB

Saginaw Enclosures, SCE-1PBSS, Push Button Enclosures, 3.5H x 3.25

Wiegmann Push button enclosure in ANSI 61 gray color features 14-gauge steel construction with polyester powder inside and out over phosphatized surface finish to offer durability and corrosion resistance. It is ideal for holding all standard brands of pushbuttons switches and pilot lights. Enclosure has continuously welded seams and smooth ground to avoid injuries. It measures 3.250 Inch x 2.810 Inch x 3.500 Inch.

Wiegmann PB1 Pushbutton Enclosure, 30mm, 1 Hole, Steel

Steel Pushbutton Enclosures – NEMA Type 12 & NEMA Type 4, 1 to 36

The Saginaw SCE-4PBSSI is a 4 hole NEMA 4X push button enclosure designed to be used with 22.5mm push buttons, switches and pilot devices. This 4 hole push button enclosure is manufactured with a heavy duty .063 stainless steel, type 304, and is #4 brush finished on all exterior surfaces. The 22.5mm hole in this stainless steel push button enclosure has 4 keyways so that it can be used with any brand of switch or 22.5mm device.