KIMYA - ASA-S Filament Ultimate 3D Printing Store

KIMYA ASA-S Filament - 500 grams The 3D filament Kimya ASA-S belongs to the styrenic polymer family. Acrylonitrile styrene acrylate (ASA) is an opaque thermoplastic terpolymer. ASA offers properties close to ABS but is suitable for long-term external use. Its resistance to climatic conditions provides it with durability over time. ASA is notably used in the automotive industry. High weather resistance High UV resistance Complies with the RoHS and REACH standards Product Dimensions: 20.7 × 20.5 × 6 cm; 0.8 kg FILAMENT PROPERTIES PROPERTIES TEST METHODS VALUES Diameter INS-6712 1.75 ± 0.1 mm Density ISO 1183-1 1.056 g/cm3 Moisture rate INS-6711 < 1 % Melt flow index (MFI) ISO 1133-1 (@220°C – 10 kg) 4 - 10 g/10min Glass transition temperature (Tg) ISO 11357-1 DSC (10°C/min - 20-300°C) 108 °C PRINT PARAMETERS AND SPECIMENS DIMENSIONS PRINTING DIRECTION XY Printing Speed 20-60 mm/s Infill 100% - rectilinear Infill Angle
KIMYA ASA-S Filament - 500 grams The 3D filament Kimya ASA-S belongs to the styrenic polymer family. Acrylonitrile styrene acrylate (ASA) is an opaque thermoplastic terpolymer. ASA offers properties close to ABS but is suitable for long-term external use. Its resistance to climatic conditions provides it with durability over time. ASA is notably used in the automotive industry. High weather resistance High UV resistance Complies with the RoHS and REACH standards Product Dimensions: 20.7 × 20.5 × 6 cm; 0.8 kg FILAMENT PROPERTIES PROPERTIES TEST METHODS VALUES Diameter INS-6712 1.75 ± 0.1 mm Density ISO 1183-1 1.056 g/cm3 Moisture rate INS-6711 < 1 % Melt flow index (MFI) ISO 1133-1 (@220°C – 10 kg) 4 - 10 g/10min Glass transition temperature (Tg) ISO 11357-1 DSC (10°C/min - 20-300°C) 108 °C PRINT PARAMETERS AND SPECIMENS DIMENSIONS PRINTING DIRECTION XY Printing Speed 20-60 mm/s Infill 100% - rectilinear Infill Angle 45°/-45° Nozzle Temperature 240-260°C Bed T° 90-100°C PRINTED SPECIMENS PROPERTIES PROPERTIES TEST METHODS VALUES MECHANICAL PROPERTIES Tensile modulus ISO 527-2/5A/50 1,685 MPa Tensile Strength ISO 527-2/5A/50 38 MPa Tensile strain at strength ISO 527-2/5A/50 2 % Tensile Stress at Break ISO 527-2/5A/50 34.6 MPa Tensile strain at break ISO 527-2/5A/50 4 % Flexural modulus ISO 178 1,662 MPa Flexural strength* ISO 178 >5 % Flexural stress at conventional deflection (3,5% strain)* ISO 178 57.3 MPa Charpy impact resistance ISO 179-1/1eA 13 kJ/m² Shore Hardness ISO 868 74D Note 1 *According to ISO 178, end of the test at 5% deformation even if there is no specimen break. Note 2 The data should be considered as indicative values - Properties can be influenced by production conditions.