Tripp Lite 2-Port HDMI over Cat5 / Cat6 Extender Splitter, Transmitter for Video and Audio, 1080p at 60 Hz (B126-002)

HDMI over Cat6 Audio/Video Extender, up to 150-ft, TAA

The B126-1P0 is a receiver unit that is used with the B126-002 and B126-004 transmitter units. It extends a 1080p (60Hz) signal to a monitor up to 50 ft. away using Cat5e/6 cable. To achieve maximum distance and resolution, use 24Awg Solid Wire Cat5e/6 cable. (Tripp Lite's N202-Series) No power is required, and its built-in HDMI male connector plugs directly into a monitor without the need for an additional cable.

Tripp Lite B126-1P0 HDMI Over Cat5 Passive Extender Remote Unit

Tripp Lite HDMI Wireless Extender Kit W IR for Boardrooms Conference Rooms

1 IN x 2 OUT EXTENDER KIT: Transmitter and receiver work in tandem to extend an HDMI signal via a single Cat5e/6 cable to 2 projectors, monitors or

Tripp Lite 1 x 2 HDMI Over Cat5/Cat6 Extender Kit, Transmitter and Receiver, 1080p @ 60 Hz, Up to 200-ft. (B126-2A1)

Choose Connection for Tripp Lite . Buy a Tripp Lite 4-Port HDMI over Cat5 Cat6 Extender Splitter, Transmitter for Video and Audio, 1080p at 60Hz and

Tripp Lite 4-Port HDMI over Cat5 Cat6 Extender Splitter, Transmitter for Video and Audio, 1080p at 60Hz

Tripp Lite DisplayPort to HDMI over Cat6 SplitterExtender Kit PoC 2 Ports 4K 60 Hz 125 ft. 38 m TAA Transmitter 2 receivers videoaudio extender HDMI DisplayPort over CAT 6 2 ports

Tripp Lite HDMI Over Cat5-Cat6 Extender Kit Power Over Cable 1080P 60 Hz Taa

The BHDBT-T-SI-4X4 HDBaseT HDMI over Cat5e/6/6a 4x4 Extender Matrix Transmitter works in tandem with the Tripp Lite BHDBT-Series receiver in your HDBaseT installation to extend uncompressed HDMI video and audio, RS-232 serial and IR remote control signals. It features four HDMI input ports and four RJ45 output ports, letting you route any source to any display or the same source to all displays.

Tripp Lite HDBaseT HDMI Over Cat5e Cat6 Cat6a 4x4 Extender Transmitter

The B126-2P2M-POC 2-Port HDMI over Cat5/Cat6 Extender Kit includes a two-port transmitter and two low-profile receivers that work in tandem to extend an HDMI audio/video signal to two projectors, monitors or televisions. The kit is recommended for digital signs, trade shows, classrooms, churches, offices, retail settings and other applications where the source is located farther than conventional cables allow.