Polymaker PolyMax PETG-ESD (Electrostatic Discharge Safe) Filament 3D
PolyMax™ PETG-ESD offers better mechanical properties than any other regular PETG. Additionally the added carbon nanotubes makes it ESD safe.ESD: Electrostatic discharge. Printing, Drying and Annealing Settings? Printing Temperature: 250˚C - 290˚CBed Temperature: 70˚C - 80˚CPrinting Speed: 30mm/s - 50mm/sFan: 20%Direct
PolyMax™ PETG-ESD offers better mechanical properties than any other regular PETG. Additionally the added carbon nanotubes makes it ESD safe.ESD: Electrostatic discharge.
Printing, Drying and Annealing Settings?
Printing Temperature: 250˚C - 290˚CBed Temperature: 70˚C - 80˚CPrinting Speed: 30mm/s - 50mm/sFan: 20%Direct Drive:Retraction Distance: 1mmRetraction Speed: 20mm/sIndirect Drive:Retraction Distance: 3mmRetraction Speed: 40mm/sDrying Settings: 65˚C for 6h(Only if the material has absorbed moisture)
Do I need to use the cooling fan with PolyMax™ PETG?
If you are looking to produce the strongest part (high layer adhesion), we recommend to switch off your part cooling fan.If you are looking for a high quality surface finish, we recommend to switch on your part cooling fan.
Usually the best of both worlds is to leave the part cooling fan at 20%.
0.5kg cardboard spool:Spool Inner Hole Diameter: 55±1mmSpool Diameter: 200±1mmSpool Width: 65.6±2mmSpool Weight: 190±7g
Polymaker PETG Filament 1.75mm Teal PETG, 1kg Spool Vietnam
PolyMax PETG-ESD 2.85mm 500g - EC 3D Printing Supplies
PolyMax™ PETG-ESD - Polymaker
PolyMax PETG ESD
Filaments - Puzzlebox 3D Solutions
ESD-PETG 3D Printing Filament, Made in the USA!
DigitMakers- 3D Printing Filaments Canada Special PLA 3 mm / 2.85
3D Printing Solutions > 3D Printer Store > 3D Printing Filaments
PolyMax PETG-ESD HartSmart Products
PolyMax PETG-ESD 1.75mm 500g - EC 3D Printing Supplies
Raise3D Industrial PETG ESD Filament
PolyMax™ PETG-ESD - Polymaker
ESD-PETG 3D Printing Filament, Made in the USA!
PolyMax™ PETG-ESD