PoE Adapters for Non-PoE IP Cameras
These small adapters will allow you to turn your IP cameras that are not PoE in to PoE IP cameras so you can send data/power over a single network cable. Simply connect the adapters to each end of the cable, and to your IP security camera. On the power en
CCTV Camera World is a direct supplier of security cameras and IP PoE camera systems backed by expert technical support. Call (877) 522-8836 today.
These small adapters will allow you to turn your IP cameras that are not PoE in to PoE IP cameras so you can send data/power over a single network cable. Simply connect the adapters to each end of the cable, and to your IP security camera. On the power end, connect a 12VDC power adapter to the female power jack, and the network connector to your router or switch. We recommend you don't use a PoE switch with this setup. You should be using a 12V DC 2amp Power adapter with these. The current output on the other end, depends on the gauge and whether your network wire is full copper or CCA.
Here's a list of cameras from CCTV Camera World that you will need these connectors with:
5 Megapixel IP Camera, 300ft IR Night Vision Onvif, 5MPBC6
5 Megapixel IP Camera 300ft IR Night Vision Onvif Compatible, 5MPBC8
Here's a diagram of how it all works:
Don't forget to watch the video below to learn more about how you can use these adapters even with PTZ cameras.
What's Included?
(1 Pair) Passive PoE Power Adapters
Please note the color of the adaptor varies with the stock we have. They may be white or black in color depending on what we have in stock.
NVR Security System - What You Want to Know about
PTZOptics: A manufacturer of robotic pan, tilt, zoom camera solutions
Paruht PoE Splitter Power Over Ethernet Adapter Active 48V to 12V for IP Camera IP Phone POE Devices PoE Switches
TL-POE150S, PoE Injector
Power over Ethernet (PoE) and Its Benefits
Input Power Voltage: DC 44-54V, Output Power: DC 12V 1-1.5A 18W Max. Main body is made of waterpoorf desgin (one-piece injector molding) Data Rate
ANVISION 4-Pack Active 48V to 12V Waterproof PoE Splitter Adapter, IEEE 802.3af Compliant 10/100Mbps, for IP Camera AP Voip Phone and More, White
Great Choice Products GCP-0105-01084302 Gigabit Poe Splitter Adapter,12V 2A Output,1000Mbps, Ieee 802.3Af/At, Suitable For Ip Cameras, Ap Wifi, Ip Phones, And Oth…
EL-POE-ISP02 PoE Combiner Splitter
TP LINK PoE Injector - Office Depot
IEEE 802.3bt Gigabit 90W PoE++ Injector - EDIMAX
Support Non-Poe Duplex Gigabit Speeds Network Distances up to 100M (328 ft) Black – OOSSXX
Planet PoE-164 30W High Power PoE+ Ethernet Injector
Splits Incoming PoE Signal To 12V DC 1A For Power + RJ45 Ethernet For Video True Plug-&-Play, Auto Detect,Designed For HD IP CCTV Video Surveillance
DSC PoE Splitter to Power Non-PoE Cameras: Splits Incoming PoE Signal to 12VDC (1A) Power + RJ45 Ethernet Video, 10/100Mbps, 15.4W Per Port, IEEE
Send IP Camera Signal, Transmission up to 984', RJ45 and BNC Connection Terminations, Support 10/100 MB/s Transmission Rate. This Triplett POE-1TR IP Extender over Coax pair is a low cost easy and speedy solution that allows you to use existing coax cable to send an IP camera signal. The extender has a 984' transmission range.It has RJ45 and BNC connections and supports 10/100 MB/s transmission rate.The unit is passive with no power required.
GEM by Triplett POE-1TR IP Extender over Coax, One Pair