Piezo Buzzer (PS1240)

Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with a 3-30V peak-to-peak square wave. To use, connect one pin to ground (either one) and the other pin to a square wave out from a timer or microcontroller. For the loudest tones, stay around 4 KHz, but works quite well fr
Official Raspberry Pi reseller. The ultimate Raspberry Pi & maker superstore with all of the biggest brands under one roof. Raspberry Pi Zero stockist. Next Day delivery available.
Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with a 3-30V peak-to-peak square wave. To use, connect one pin to ground (either one) and the other pin to a square wave out from a timer or microcontroller. For the loudest tones, stay around 4 KHz, but works quite well from 2KHz to 10KHz. For extra loudness, you can connect both pins to a microcontroller and swap which pin is high or low ('differential drive') for double the volume. Datasheet available here. Specification Diameter: 11.90mm/0.47in Height: 6.53mm/0.26in Weight: 0.70g/0.02oz

Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, connect

Piezo Buzzer - PS1240

PS1240P02BT TDK Corporation, Audio Products

PS1440P02BT datasheet - Specifications: Type: Piezo Transducer, External Drive

Solved You are using a transistor driver circuit to control

Piezo Buzzer - Niska cena na

Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, connect

Piezo Buzzer - PS1240

Piezo Buzzer (PS1240)

Key Features Used for making beeps, tones and alerts Driven with 3-30V peak-to-peak square wave Petite but loud Includes a single piezo buzzer Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, connect one pin to ground (either one) and the other pin to a square wave out from a timer or microcontroller. For the loudest tones, stay around 4 KHz, but works quite well from 2KHz to 10KHz.