LONGER Anycubic wash and cure Machine

The anycubic wash and cure Machine from Longer is a high-quality washing and curing station designed for use with a variety of 3D printing resins, providing improved cleaning and curing results.
【2-in-1 Design & Full Metal Body】The wash & cure machine is designed for two functions-washing the models after printing and curing the model after washing. It's easier for users to use one machine to handle the process after printing. It's design perfectly for resin 3d printer and built with full metal body material and sealed body for safer design.  【Washing Modes】There're three options for washing: Heavey/Normal/Gentle washing. Model One: Remove the model from printing platform and put the model into the basket for wasing; Mode Two: Hang the printing platform onto the platform bracket for suitable position and fill with alcohol. The hanging is not only compatible with Orange 10, Orange 30 & Orange 4K, but also for Anycubic Photon, Photon S, Photon Mono, Elegoo Mars, Mars Pro, Mars Pro2, Creality LD-002R, LD-002H, etc.  【Curing Mode】Integrated with dual wavelength UV LED, 385nm & 405nm for fully curing; built-in 360° auto rotatable platform and full angle UV reflector for better curing. There're four duration for curing: 2/4/6/8 minutes.   【99.95% UV Isolated Hood】This machine comes with one-piece hood and block with 99.95% UV lighting when curing. And the curing system will be paused if the hood is lid up during curing, of which it will be better for health in case incident.  【Warranty and Service】NOTE: The printer comes without resin. 12-Month machine warranty and Lifetime Technical Support. High-efficiency and considerate community support by us.

Anycubic to Launch New Wash & Cure Plus

Wash & Cure Max : r/AnycubicPhoton

Is it worth me buying a wash and cure (anycubic) for clean and cure multiple of these parts at one time? If so how many of these can be w&C at one

Anycubic Wash and Cure Plus Station for Resin 3D Printer

ELEGOO Mercury X Bundle Washing and Curing Station – ELEGOO Official

Main Features Models Display Tech Specs In The BoxComparison, Anycubic Wash & Cure 3 PlusMain Features, Size Upgrade, Capacity Increased, Compared

Anycubic Wash & Cure 3 Plus

ANYCUBIC Wash & Cure Plus Machine – The 3D Printer Store

【Size Upgraded, Capacity Increased】Compared with Anycubic wash & cure plus, wash and cure 3 plus's washing basket volume is increased by about 13.4%

ANYCUBIC Wash & Cure Plus 3.0, Large Size for Anycubic Mono M5s LCD MSLA SLA 3D Printer, Powerful Curing Light, Improved IPA Usage, Cleaning Volume

Step into the world of high-speed 3D printing with the Anycubic Photon Mono X 3D Resin Printer. Create figurines, logos, and more with this at-home Photon Mono X 3D printer, printing high-speed resin builds 3X faster than the Photon. Exposure time with the LED screen is reduced to 1 second, which is 2 to 3 times faster than RGB screens. The matrix parallel light source from the 6-inch 2K monochrome LCD provides uniform exposure, high efficiency, and better heat dissipation.

Anycubic Photon Mono x 6K 3D Printer Maker Bundle, Photon Mono x 6K + Wash & Cure Plus + 4 UV Resin 1kg

ANYCUBIC Wash and Cure 3.0, Newest Upgraded Volume 2 in 1 Wash and Cure Station, with Gooseneck Lights, for Mars Anycubic Photon Mono 4K 2 LCD SLA DLP 3D Printer, Washing Size

ANYCUBIC Wash & Cure Max Machine Station, Spray Cleaning and 360° Dimensional Curing Powerful and Alcohol-Efficient For 13.6'' For SLA LCD UV Resin 3D Printer