ART DTI Isolation Box – Dual Channel – Passive – 1/4” TRS, RCA, XLR – Easy Music Center

The DTI (Dual Transformer/Isolater) is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels while an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of maintaining signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 ohms to 100k ohms.

What further sets the DTI apart from other lesser isolation boxes is its connection versatility. We have provided XLR, 1/4″ phone, and RCA type phono connections on all inputs and outputs. This allows it to easily fit into virtually any audio system and be the clean patch point between all types of systems. Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of a signal source from your recording equipment, or in many cases, just a safer connection between two audio systems, the DTI can accommodate. The compact black anodized all aluminum case and it’s passive design allow the DTI to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It’s full feature set, rugged construction, and high-end specifications make the DTI the obvious choice.

Features

Isolates Components in Sound Systems to Eliminate Ground Issues
High Quality Transformers
XLR, 1/4-inch and RCA Inputs and Outputs
Rugged Anodized Aluminum Case
Passive Design

Specs

Frequency Response 10Hz-50kHz +/-.5dB@+4dBu
Total Harmonic Distortion .01% Typical @ 1kHz, +18dBu, <.05% @ 100Hz, +24dBu
Insertion Loss .4dB@100k Ω load, 5.5dB @ 600 Ω load
Input Connectors XLR-F Balanced,1/4-inch TRS Balanced / Unbalanced, and RCA Jacks
Output Connectors XLR-M Balanced, 1/4-inch TRS Balanced / Unbalanced and RCA Jacks
Power Requirements Passive
Dimensions 1.75″H x 4.2″W x 3.5″D (44.5mm x 107mm x 89mm)
Weight .75 lbs (0.34kg)

The DTI (Dual Transformer/Isolater) is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels while an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of maintaining signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 ohms to 100k ohms.What further sets the DTI apart from other lesser isolation boxes is its connection versatility. We have provided XLR, 1/4″ phone, and RCA type phono connections on all inputs and outputs. This allows it to easily fit into virtually any audio system and be the clean patch point between all types of systems. Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of a signal source from your recording equipment, or in many cases, just a safer connection between two audio systems, the DTI can accommodate. The compact black anodized all aluminum case and it’s passive design allow the DTI to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It’s full feature set, rugged construction, and high-end specifications make the DTI the obvious choice. Features Isolates Components in Sound Systems to Eliminate Ground Issues High Quality Transformers XLR, 1/4-inch and RCA Inputs and Outputs Rugged Anodized Aluminum Case Passive Design Specs Frequency Response 10Hz-50kHz +/-.5dB@+4dBu Total Harmonic Distortion .01% Typical @ 1kHz, +18dBu, <.05% @ 100Hz, +24dBu Insertion Loss .4dB@100k Ω load, 5.5dB @ 600 Ω load Input Connectors XLR-F Balanced,1/4-inch TRS Balanced / Unbalanced, and RCA Jacks Output Connectors XLR-M Balanced, 1/4-inch TRS Balanced / Unbalanced and RCA Jacks Power Requirements Passive Dimensions 1.75″H x 4.2″W x 3.5″D (44.5mm x 107mm x 89mm) Weight .75 lbs (0.34kg)

ART DTI dual transformer/isolator - DM Music Ltd

Isolates Components in Sound Systems to Eliminate Ground Issues, High Quality Transformers, XLR, 1/4-inch and RCA Inputs and Outputs, Rugged

ART DTI dual transformer/isolator

ART DTI dual transformer/isolator - DM Music Ltd

Radial Engineering R8001100 ProDI Single Ch Passive DI Box

The Radial IceCube IC-1 is a balanced line level isolator designed to quickly eliminate hum and buzz problems in an audio system by simply inserting it into the signal path. Measuring just over 4 x 1½ (10 x 4cm) the compact design begins with two super-duty glass-filled nylon XLRs at each end with heavy duty nickel-silver contacts that will not tarnish over time. Unlike other isolators that are made of plastic the IceCube is made from solid 16 gauge steel and finished in a tough powder coat.

Radial Engineering IceCube IC-1 Balanced Line Isolator

Hum in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called ground loops. The safest way to eliminate unwanted noise is with the CleanBOX II. The CleanBOX II easily removes ground loops without any signal degradation.

Art - CleanBOX II (Hum Eliminator)

Art Pro Audio Dti Transformer/Isolator : : Home & Kitchen

TMP-Pro - Category Page: MI Products Accessories > Interface Solutions > Direct Boxes

Housed in a high impact nylon casing, the ISOPOD safely sums to mono and transformer isolates unbalanced 1/8 (3.5mm) stereo connections to balanced, XLR. Nominal insertion loss = -6 dB. Use it to create a balanced mono signal from MP3 players and computers to send to professional mixers' line inputs. Safely sums to mono and transformer isolates unbalanced 1/8(3.5mm) stereo connections to balanced XLR.