eSun ePLA-HS 1.75mm 1KG 3D Printer Filament – MakerSupplies Singapore

By balancing the melt flow index and melt temperature, the ePLA-HS (high speed PLA) can flow smoothly in molten state and cool fast during printing. In this way, it can achieve smooth printing without clogging and fast cooling without deformation during high speed printing! ePLA-HS Features：【Designed for High Speed Printer】Under same model and printing time, eSUN PLA HS can print 3-5 times faster at a speed of 250mm/s than ordinary PLA at low speed of 50mm/s. Printing efficiency can be increased by 300%. 【High Compatibility】Compatible with Bamboo Lab Bamboo Lab X1 and X1C /Creality K1 and K1 MAX/AnkerMake M5/Voron 2.4 /Flsun V400/Creality Ender 7 and K1 K1 MAX/ Raise 3D Pro 3 and RMF500. 【High Precision & Smooth Extrusion】eSUN PLA HS can maintain the printing quality and retain the integrity of the complete fine structures without layer
By balancing the melt flow index and melt temperature, the ePLA-HS (high speed PLA) can flow smoothly in molten state and cool fast during printing. In this way, it can achieve smooth printing without clogging and fast cooling without deformation during high speed printing! ePLA-HS Features：【Designed for High Speed Printer】Under same model and printing time, eSUN PLA HS can print 3-5 times faster at a speed of 250mm/s than ordinary PLA at low speed of 50mm/s. Printing efficiency can be increased by 300%. 【High Compatibility】Compatible with Bamboo Lab Bamboo Lab X1 and X1C /Creality K1 and K1 MAX/AnkerMake M5/Voron 2.4 /Flsun V400/Creality Ender 7 and K1 K1 MAX/ Raise 3D Pro 3 and RMF500. 【High Precision & Smooth Extrusion】eSUN PLA HS can maintain the printing quality and retain the integrity of the complete fine structures without layer lines and deformation while printing in high speed. 【 High Speed Printing & Fast Cooling】eSUN PLA HS finds a balance between high speed printing and printing quality. Excellent Fluidity and viscosity factor avoid excessive stringing and sagging. 【Easy To Print】No bubbles, less stringing, high successful printing rate. Made with starch raw materials derived from renewable plant resources; Low Odor Model: eSun ePLA-HSDiameter Format: 1.75mmNet Weight: 1kgPrinting Temperature: 210-230℃ (Recommended Temperature 215℃)Bed Temperature: 45-60℃Density: 1.24 g/cm3Tensile Strength: 66 MPaElongation at Break: 18.3%Flexural Strength: 79 MPaFlexural Modulus: 2700 MPaIZOD Impact Strength: 3.08 KJ/m²Melt Flow Index (g/10min): 5.2 (190℃/2.16kg)Heat Distortion Temperature: 53 (℃, 0.45 MPa)Certificate: MSDS, TDSPackaging: Vacuum packed with silica desiccantWarranty: 1 Year