2.5 Nyalox Cup Brush For Drill — Wane+Flitch

Best for cleaning/removing bark from live edge slabs 2.5" Abrasive nylon cup brush with hex mount Lasts up to 10x longer than traditional wire brushes Will not shed, rust, puncture skin, or lose shape 1/4” Hex Mandrel mounted Maximum 4500 RPM Gray=80 grit Orange=120 grit Blue=240 grit White=Non-abrasive Commonly used

Best for cleaning/removing bark from live edge slabs
2.5 Abrasive nylon cup brush with hex mount
Lasts up to 10x longer than traditional wire brushes
Will not shed, rust, puncture skin, or lose shape
1/4” Hex Mandrel mounted
Maximum 4500 RPM
Gray=80 grit Orange=120 grit Blue=240 grit White=Non-abrasive

Commonly used in woodworking for removing and cleaning bark from live edge slabs without damaging its natural curvature. The drill attachment allows for more control using variable speeds on most drills.

Other Applications: Deburring, blending, cleaning, scrubbing, roughing, surface preparation for primers, paints and adhesives, stain removal, flash removal, surface finishing, stripping of old paints and finishes, removal of surface rust, corrosion and weld scale, etc.

Frugal Favori Wire Brushes for Drills - Wire Brushes from, brushes for drills to clean

Dico 541-780-21/2 Nyalox Cup Brush 21/2-Inch Orange 120 Grit : Industrial & Scientific

Coarse bristles for cleaning metal surfaces to remove weld scale, rust, old paint and corrosion, and give metal an excellent surface for painting. Fine bristles for light cleaning and polishing of metal on large areas. Nylon bristles impregnated with aluminum oxide - will not gouge. 1/4 shank.