Park Tool Bottom Bracket Tool for Shimano Hollowtech II Cups

The BBT9 is used to remove and install external bearing crankset bottom brackets. One end of the BBT9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. The BBT9 fits cups and lockrings with 16 external notches and an out
The BBT9 is used to remove and install external bearing crankset bottom brackets. One end of the BBT9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. The BBT9 fits cups and lockrings with 16 external notches and an outside diameter of approximately 44mm. The BBT9 works with many external bearing crankset bottom brackets, including: Shimano, Hollowtech II, Campagnolo, UltaTorque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King, Phil Wood outboard bearing The BBT9 also fits rotor disc lockrings which use 16 external notches.

Bottom Bracket Tool Park Tool

Park Tool BBT-90.3 Pressfit Bottom Bracket Bearing Tool Set

Tools - Bottom Bracket @ Spirited Cyclist Bike Shop

Shimano BB Spanner for Hollowtech II Cups

Park Tool Bottom Bracket Tool - Campagnolo - The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup. The handle of the BBT-4 is vinyl coated for comfort. The major diameter of the tool is nominally 44mm, and the minor diameter 38mm.