Arduino Nano ESP32 with Headers
The Arduino Nano ESP32 (with and without headers) is a Nano form factor board based on the ESP32-S3 (embedded in the NORA-W106-10B from u-blox). This is the first Arduino board to be based fully on an ESP32, and features Wi-Fi, Bluetooth LE, debugging via
Elektor is a community of active electronic engineers eager to design, share, sell.
The Arduino Nano ESP32 (with and without headers) is a Nano form factor board based on the ESP32-S3 (embedded in the NORA-W106-10B from u-blox). This is the first Arduino board to be based fully on an ESP32, and features Wi-Fi, Bluetooth LE, debugging via native USB in the Arduino IDE as well as low power.
The Nano ESP32 is compatible with the Arduino IoT Cloud, and has support for MicroPython. It is an ideal board for getting started with IoT development.
Features
Tiny footprint: Designed with the well-known Nano form factor in mind, this board's compact size makes it perfect for embedding in standalone projects.
Wi-Fi and Bluetooth: Harness the power of the ESP32-S3 microcontroller, well-known in the IoT realm, with full Arduino support for wireless and Bluetooth connectivity.
Arduino and MicroPython support: Seamlessly switch between Arduino and MicroPython programming with a few simple steps.
Arduino IoT Cloud compatible: Quickly and easily create IoT projects with just a few lines of code. The setup takes care of security, allowing you to monitor and control your project from anywhere using the Arduino IoT Cloud app.
HID support: Simulate human interface devices, such as keyboards or mice, over USB, opening up new possibilities for interacting with your computer.
Specifications
Microcontroller
u-blox NORA-W106 (ESP32-S3)
USB connector
USB-C
Pins
Built-in LED pins
13
Built-in RGB LED pins
14-16
Digital I/O pins
14
Analog input pins
8
PWM pins
5
External interrupts
All digital pins
Connectivity
Wi-Fi
u-blox NORA-W106 (ESP32-S3)
Bluetooth
u-blox NORA-W106 (ESP32-S3)
Communication
UART
2x
I²C
1x, A4 (SDA), A5 (SCL)
SPI
D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS)
Power
I/O Voltage
3.3 V
Input voltage (nominal)
6-21 V
Source Current per I/O pin
40 mA
Sink Current per I/O pin
28 mA
Clock speed
Processor
Up to 240 MHz
Memory
ROM
384 kB
SRAM
512 kB
External Flash
128 Mbit (16 MB)
Dimensions
18 x 45 mm
Downloads
Datasheet
Schematics
Arduino Nano ESP32 with Headers - RobotShop
Arduino Nano ESP32 with Headers - Robot Gear Australia
Buy Arduino Nano ESP32 with headers in India
Arduino Nano ESP32 Without headers [ABX00092] ESP32-S3, USB-C, Wi-Fi, Bluetooth, HID Support, MicroPython Compatible : Electronics
Complete guide of Arduino Nano ESP32
Arduino Nano ESP32 with Headers - DEV-23321 - SparkFun Electronics
Arduino Nano ESP32 Without headers [ABX00092] ESP32-S3, USB-C, Wi-Fi, Bluetooth, HID Support, MicroPython Compatible : Electronics
Arduino Nano ESP32 with headers
Arduino® Nano ESP32 with headers — Arduino Official Store
Arduino® Nano ESP32 with headers — Arduino Official Store
SOLVED] Failed to connect to ESP32: Timed out waiting for packet header
Arduino Nano ESP32 - with header
Arduino® Nano ESP32 with headers — Arduino Official Store
Arduino Nano ESP32 DEDB0581 Board, With Headers, 240 MHz Clock Frequency, USB-C Connectivity, Micropython Support, Plug and Play Debugging, 512 KB SRAM