ABS Filament, 3D4Makers
![ABS Filament, 3D4Makers](http://www.3d4makers.com/cdn/shop/products/PhotoABSRedFilament3Dprinting.png?v=1591558677)
ABS (Acrylonitrile-Butadiene-Styrene) Filament ABS (Acrylonitrile butadiene styrene) is one of the most used materials in the plastics industry and gained a lot of popularity within the 3D printing sector due to the ease of processability and great mechanical properties. This ABS filament is a strong material with a high toughness, high impact resistance and is also light and durable. After the print is done you can easily post-process the object by sanding it or with a acetone vapor installation to get rid of the visible layers and get a injection molded surface quality. Measurements & Tolerance Size Diameter tolerance Roundness 1,75 mm Filament +/- 0,05mm 95% 2,85 mm Filament +/- 0,10mm 95% Material properties Description Value Test method Density 1,05 g/cm3 ISO 1183/B Melt Mass-Flow Rate (MFR) (220ᵒC/10KG) 15 g/10 min SO 1133 Tensile Stress 45 Mpa ISO 527-2/50 Flexural Modulus 2300
ABS (Acrylonitrile-Butadiene-Styrene) Filament
ABS (Acrylonitrile butadiene styrene) is one of the most used materials in the plastics industry and gained a lot of popularity within the 3D printing sector due to the ease of processability and great mechanical properties. This ABS filament is a strong material with a high toughness, high impact resistance and is also light and durable. After the print is done you can easily post-process the object by sanding it or with a acetone vapor installation to get rid of the visible layers and get a injection molded surface quality.
Measurements & Tolerance
Size
Diameter tolerance
Roundness
1,75 mm Filament
+/- 0,05mm
95%
2,85 mm Filament
+/- 0,10mm
95%
Material properties
Description
Value
Test method
Density
1,05 g/cm3
ISO 1183/B
Melt Mass-Flow Rate (MFR) (220ᵒC/10KG)
15 g/10 min
SO 1133
Tensile Stress
45 Mpa
ISO 527-2/50
Flexural Modulus
2300 Mpa
ISO 178
Impact strength Notched Izod
19 Kj/m²
ISO 180/A
Tensile Strain
2,50%
ISO 178
Printer settings
Description
Value
Printer nozzle temperature
240 - 280°C
Heated bed temperature
90 - 110°C
Bed Adhesion
Magigoo Original on glass or a PEI Sheet
Additional info
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun.
When the 3D printer is not being used it is important to keep the 3D4MAKERS ABS Filament in a bag and stored in a cool (15-25˚C) and dry room away from UV light until it is used again.
*Our ABS Filament is also available in ABS ESD filament and in ABS Kevlar filament.
![](https://www.na3d.eu/resize/e/440/440/files/esun/filaments/abs-plus/abs-plus-light-blue-1.75/abs--light-blue-8.jpg)
Material ABS - rigid and tough material
![](https://3dcompare.com/materials/wp-content/uploads/2018/05/lnisz9nvS1rSGyUrZeWA_PPSU-Filament-1024x1024.jpg)
3D4Makers Natural PPSU Filament 2.85 mm - 3D Compare Materials
![](https://www.3d4makers.com/cdn/shop/files/PEEK_Filament_foto_slide_1200x.png?v=1613570793)
High Quality Filaments PEEK, PEKK, PEI, PPSU, PCL, PETG, ABS, PLA, C8
![](https://www.3d4makers.com/cdn/shop/products/PhotoABSRedFilament3Dprinting_grande.png?v=1591558677)
ABS Filament, 3D4Makers
![](https://plas.tv/wp-content/uploads/2018/05/logo-Perstorp.jpg)
Perstorp AB and 3D4Makers sign a Joint Venture agreement –
3D4Makers.com
![](https://www.3d4makers.com/cdn/shop/files/unique_250x.png?v=1613157250)
High Quality Filaments PEEK, PEKK, PEI, PPSU, PCL, PETG, ABS, PLA, C8
![](https://www.voxelmatters.com//wp-content/uploads/2017/10/3D4Makers-U-08.png)
3D Printing Filament Industry Leaders Discuss Opportunities
![](https://www.3dnatives.com/en/wp-content/uploads/sites/2/2023/11/Cover-VS-EN-1280x720.jpg)
Filaments vs Pellets: Which Type of Plastic to Choose for 3D Printing? - 3Dnatives