3rd Gen Stackable USB Hub for Raspberry Pi Zero
![3rd Gen Stackable USB Hub for Raspberry Pi Zero](https://cdn10.bigcommerce.com/s-u7jmw/products/128/images/870/pi-zero-hub-hat-v1__90609.1490075437.1280.1280.jpg?c=2)
![](https://cdn-shop.adafruit.com/970x728/3298-01.jpg)
Zero4U
Modified spring loaded pogo pin locations to support the Pi Zero v1.3 (the one with the camera port). USB port position rearrangements to provide best adaptability to USB devices in different sizes. Pogo pins and the four supporting poles have been elongated to further increase the headroom between the Pi Zero board and the USB hub board, hence, longer header pins are allowed for the Pi Zero header.
![](https://m.media-amazon.com/images/I/51gIpgneOOL._AC_UF350,350_QL50_.jpg)
MakerSpot 4-Port Stackable USB Hub Hat for Raspberry Pi Zero V1.3 with 2.4a Power Supply & 1.5m Micro USB Cable with on Off Switch
![](https://media-cdn.elecrow.com/media/webp_image/catalog/product/cache/093bfd989d39221ae519c2996e34d6c7/5/-/5-.webp)
Three Port USB Hub with Ethernet for Raspberry Pi Zero
![](https://www.infineon.com/export/sites/default/_images/product/security-smart-card-solutions/OPTIGA_TPM_SLB_9672_RPI_board.png_137448486.png)
OPTIGA TPM 9672 RPI EVAL - Infineon Technologies
4 port Fitting USB Hub Hat
![](https://cdn10.bigcommerce.com/s-u7jmw/products/128/images/649/pi-zero-hub-hat-v1.3-04__51773.1468825053.1280.1280.jpg?c=2)
3rd Gen - Stackable USB Hub for Raspberry Pi Zero v1.3 (Compatible with Raspberry PiZero W / 2W)
![](https://www.thorlabs.com/Images/GuideImages/4037_PM100USBPowerEnergyInterface_9.jpg)
Power and Energy Meter Interfaces with External Readout
![](https://cdn-shop.adafruit.com/970x728/3298-03.jpg)
Zero4U
![](https://botland.store/img/art/inne/21433_6.jpg)
Case + HDMI-USB Hub module kit for Raspberry Pi Zero/Zero W/Zero 2 W - Argon POD Botland - Robotic Shop
![](https://picockpit.com/raspberry-pi/wp-content/uploads/2021/11/Tuning-your-pi-zero-w-2.jpg)
Everything about Raspberry Pi Zero 2 W
Modified spring loaded pogo pin locations to support the Pi Zero v1.3 (the one with the camera port). USB port position rearrangements to provide best adaptability to USB devices in different sizes. Pogo pins and the four supporting poles have been elongated to further increase the headroom between the Pi Zero board and the USB hub board, hence, longer header pins are allowed for the Pi Zero header.
![](https://m.media-amazon.com/images/I/61ddTiugdDL._AC_UF350,350_QL80_.jpg)
MakerSpot 4-Port Stackable USB Hub Hat for Raspberry Pi Zero V1.3 (with Camera
![](https://hackaday.com/wp-content/uploads/2021/02/pi4power_feat.jpg)
PCB Mods Silence Voltage Warnings On The Pi 4