CROSBY MANILLE S213 4-3/4 TONNES 3/4 - Manilles métalliques - CRB1018142

Trouvez votre CROSBY MANILLE S213 4-3/4 TONNES 3/4 chez Grainger Canada, anciennement Acklands-Grainger. Grainger Canada a été le premier fournisseur industriel pendant plus de 125 ans, avec un service supérieur de qualité.

Forged, heat-treated body and pin Alloy steel shackles meet Federal RR-C271D standards For applications where the shackle is removed frequently. Shackles are permanently marked with size and working load limit (WLL), in tons. Wide-body shackle units have powder-coat finish.

Crosby G209 4.75T Screw Pin Anchor Shackle 3/4 inch (1018491)

Manille à goupille boulonnée - Crosby

Crosby 3/4 G-213 Round Pin Anchor Shackle (WLL 4.75 ton)

MANILLE S213 4-3/4 TONNES 3/4

The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when

3/4 inch Crosby-McKissick D-Shackle - 4-3/4 TON - North American Made (Single) (4X4 Vehicle Recovery)

Shackles - Lifting Products - Crosby General Catalog

Manille à goupille boulonnée - Crosby

MANILLE CROSBY G209

Shackles - Lifting Products - Crosby General Catalog

Crosby 419 4-1/2 BB Snatch Block w/ Shackle - 4 Ton WLL - #109064

Alloy steel--Quenched and Tempered, Individually proof-tested with certification, Proof-tested with special fixtures sized to prevent localized point

Home

MANILLE CROSBY G209

USA-made Crosby bolt type shackles are excellent for permanent or long-term applications, or if there’s a risk of a load sliding on the shackle pin, causing it to rotate. The anchor bow style accommodates loads or pulls from multiple angles. Manufactured with a thin head bolt with nut/cotter pin combination. Forged- quenched and tempered; hot dipped galvanization adds a layer of protection from corrosive elements.

Crosby Anchor Shackle - Bolt Type - 3/4 - G-2130 - 4.75 Ton

MANILLE CROSBY G209

Working Load Limit and Grade 6 permanently shown on every shackle, Forged, Quenched & Tempered, with alloy bolts, Hot-dip galvanized (G). 85, 120, and