S'abonner

Connection

M5-0.8 Short Brass Threaded Inserts – Initeq

M5-0.8 Short Brass Threaded Inserts – Initeq

These create much more convenient and professional parts than using "captive nuts" (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work.These are inserted into a hole in the p
These create much more convenient and professional parts than using captive nuts (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work.

These are inserted into a hole in the print that is slightly smaller than the insert, and set in place using a soldering iron to melt the plastic around the insert. The inserts have a slight taper and small fins that the plastic flows around, resulting in an extremely strong bond.

Rather than adjust designs around the limitations of 3D printing (supports, print bed size, etc), divide your parts into separate components that fasten using these inserts and machine screws. Not only does this give you greater flexibility when designing a part, but also allows you to re-print only failed components rather than full assemblies - saving time and money.

These are threaded M5-0.8 with an overall length (OAL) .265
Recommended hole size is .315 (top) and .303 (bottom)

These create much more convenient and professional parts than using captive nuts (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work.These are inserted into a hole in the print that is slightly smaller than the insert, and set in place using a soldering iron to melt the plastic around the insert. The inserts have a slight taper and small fins that the plastic flows around, resulting in an extremely strong bond.Rather than adjust designs around the limitations of 3D printing (supports, print bed size, etc), divide your parts into separate components that fasten using these inserts and machine screws. Not only does this give you greater flexibility when designing a part, but also allows you to re-print only failed components rather than full assemblies - saving time and money.These are threaded M5-0.8 with an overall length (OAL) .265Recommended hole size is .315 (top) and .303 (bottom)

M2.5 Short Brass Threaded Inserts – Initeq

IN-506-M5 5,8mm Brass Threaded Insert

M5-0.8 Brass Knife Threaded Inserts Order an E-Z Knife Threaded Insert for Hard Wood from E-Z LOK

Initeq - Buying Guide

500pcs M5 5mm M5-0.8 Brass Threaded Inserts 3D Printing Bolts Screws Metal Short

[initeq] M5-0.8 M5 Threaded Heat Set Inserts for 3D Printing (20, Long) : Industrial & Scientific

Qty 500 M5 5mm M5-0.8 Long Metal Threaded Heat Set Screw Inserts for 3D Printing

50X INITEQ DURATHREAD #8-32 Brass Threaded Heat Set Inserts 3D Printing (Long) £13.58 - PicClick UK

initeq] Brass Threaded Inserts for Plastics Assortment A - Import It All

E-Z Press™ Threaded Insert - Flanged - Brass - M5-0.8

: Tools & Home Improvement

[initeq] M5-0.8 M5 Threaded Heat Set Inserts for 3D Printing (50, Long)

E-Z Press™ Threaded Insert - Flanged - Brass - M5-0.8