eSun PLA 1.75mm Filament 1kg – Bits4Bots
![eSun PLA 1.75mm Filament 1kg – Bits4Bots](https://www.bits4bots.co.nz/cdn/shop/products/PLA-TRANSPARENTNATURAL_SSV3AI168EED.png?v=1659499979&width=500)
eSun have made the move to Cardboard Spools. You can find out more about this here. You may receive a mix of different types of spools as we work through our stock. PLEASE NOTE for Bambu Labs AMS users - The Cardboard spools will be able to be used in the AMS with the help of the ring adapters. The link to download the
eSun have made the move to Cardboard Spools. You can find out more about this here. You may receive a mix of different types of spools as we work through our stock. PLEASE NOTE for Bambu Labs AMS users - The Cardboard spools will be able to be used in the AMS with the help of the ring adapters. The link to download the STL for the adaptors can be found above. You will however NOT be able to close the lid of the AMS while in use
PLA is an environment-friendly material. PLA 3D printer filament is easy to print and the printed model has smooth surface. Compared with ABS filament, eSUN PLA filament has higher rigidity and strength similar to PC, and does not need to close the cavity; Our best PLA filament has low shrinkage rate, no warping, no cracking, and can print large size model.
No pungent smell when PLA 3D printer filament are printed, safe and environmental protection.eSUN PLA filament has be approved by FDA, safer for use; Our best PLA filament can be used for conceptual model, rapid prototyping, and metal parts casting.
Filament Properties Table
3D PRINTING FILAMENT
PLA
Density(g/cm3)
1.2
Heat Distortion Temp(℃,0.45MPa)
53
Melt Flow Index(g/10min)
3.5(190℃/2.16kg)
Tensile Strength(MPa)
72
Elongation at Break(%)
11.8
Flexural Strength(MPa)
90
Flexural Modulus(MPa)
1915
IZOD Impact Strength(kJ/㎡)
5.4
Durability
4/10
Printability
9/10
Recommended printing parameters
Extruder Temperature(℃)
190 – 230℃Recommended temperature:215℃
Bed temperature(℃)
45 – 60°C
Fan Speed
100%
Printing Speed
40 – 100mm/s
Heated Bed
Optional
Recommended Build Surfaces
Masking paper, PVP solid glue, PEI
Feature
Flexible
——
Elastic
——
Impact Resistant
——
Soft
——
Composite
——
UV Resistant
——
Water Resistant
——
Dissolvable
——
Heat Resistant
——
Chemically Resistant
——
Fatigue Resistant
——
Need drying
——
Heated Bed Required
——
Print recommend
——
DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.
![](https://www.bits4bots.co.nz/cdn/shop/products/ABS_eSun_SKU1DLATNLR2.jpg?v=1659490428&width=1445)
eSun ABS+ 1.75mm Filament 1kg – Bits4Bots
![](https://www.bits4bots.co.nz/cdn/shop/products/Sampleleadphotonylon.png?v=1663642605)
Sample - eSun ePA (Nylon) 1.75mm Filament – Bits4Bots
![](https://www.bits4bots.co.nz/cdn/shop/products/PLA-LWMARBLEeSTARSLUMINOUS-SHOPIFYFILAMENT_ETSY_TEMPLATE500pxX500px_3.png?v=1663646452&width=500)
Sample - eSun PLA Luminous 1.75mm Filament – Bits4Bots
![](https://www.bits4bots.co.nz/cdn/shop/files/PLA-MATTESTRAWBERRYREDC2.png?v=1693535666&width=1445)
eSun ePLA-Matte 1.75mm Filament 1kg – Bits4Bots
![](https://www.bits4bots.co.nz/cdn/shop/products/ePLA-GF_1.png?v=1680050981&width=416)
eSun PLA-GF (Glass Fiber) – Bits4Bots
![](https://www.bits4bots.co.nz/cdn/shop/files/SilkMystic-CopperPurpleGreen4.png?v=1695692376&width=416)
Sample - eSun ePLA-Silk Mystic Filament (Tri Colour) – Bits4Bots
![](https://www.bits4bots.co.nz/cdn/shop/products/SamplePETGSolidYELLOW1.75mm_SV21P4FS13Q9.png?v=1663650037&width=1445)
eSun PETG 3D Printing Filament - 1.75mm Filament 1kg – Bits4Bots
![](https://www.bits4bots.co.nz/cdn/shop/products/PLA_RefilamnentBlack_SSV3AC0HP34L.png?v=1659500872&width=1445)
eSun PLA+1.75mm Refilament 1 kg – Bits4Bots
![](https://www.bits4bots.co.nz/cdn/shop/products/SampleeSTARSPLA-GALAXYBLACK_SV21OLSB9YUS.png?v=1663644507&width=500)
Sample - eSun eStars PLA - Galaxy Black 1.75mm Filament – Bits4Bots