FS90R Continuous Rotation Servo from FEETECH (Fitec) – Addicore
![FS90R Continuous Rotation Servo from FEETECH (Fitec) – Addicore](https://www.addicore.com/cdn/shop/products/AD314-2.jpg?v=1689765957&width=600)
The FS90R servo is a special servo made for continuous rotation. Instead of just being able to rotate back and forth as traditional servos, the FS90R can make full revolutions, which makes it great for projects such as driving wheels on a small robot.
The FS90R is a special servo made for continuous rotation. It can make full revolutions forward or backward, which makes it great for projects such as driving wheels on a small robot. We also sell the 60mm wheels with tires made specifically for this servo.
With traditional servos you can control which position (angle of revolution) the servo's arm moves to. With the same control signals used to control traditional servos you can control the FS90R servo's shaft to be stationary or rotating either clockwise (CW) or counterclockwise (CCW) and the speed of rotation. The signal you would use to tell a traditional servo to go to its middle position, 1.5ms pulse signal (position 90 when used with the Arduino Servo library), will cause the FS90R to stop, a 2ms pulse signal (position 180) will cause the FS90R to rotate full speed counterclockwise, and a 1ms pulse signal (position 0) will cause the FS90R to rotate clockwise at full speed.
The FS90R servo includes an adjustment potentiometer to calibrate the middle-point (stopped) setting. Calibrate this setting by sending a 1.5ms (1500µs) pulse signal (position 90 when used with the Arduino Servo library), then slowly turn the middle-point adjustment potentiometer until the servo stops rotating. Access the middle-point adjustment potentiometer by inserting a small screwdriver into the hole in the bottom of the servo, see diagram below.
The servo's cable has a standard JR-style connector on the end.
Product Contents:
1 — FEETECH (formerly Fitec) FS90R Continuous Rotation Servo
1 — straight single-ended servo horn
1 — straight double-ended servo horn
1 — winged straight double-ended servo horn
1 — four-pointed star servo horn
1 — round servo horn
1 — servo horn screw
2 — FS90R servo mounting screws
Specifications:
Operating Voltage
4.8V
6.0V
Stall Torque
1.3 kg/cm (18.09 oz/in)
1.5 kg/cm (20.86 oz/in)
Max Speed
110 RPM
130 RPM
Idle Current
5 mA
6 mA
No Load Running Current
100 mA
120 mA
Stall Current
550 mA
650 mA
Operating Voltage Range
4.8V to 6V
Pulse Width Range
700 to 2300 µs
Dead Band Width
90 µs
Stop Signal
1500 (±45) µs
CW Rotation Signal Range
700 to 1500 µs
CCW Rotation Signal Range
1500 to 2300 µs
Internal Gears
Plastic
Cable Length
23 cm (9.06)
Dimensions (detailed dimensions)
Length
32.6 mm (1.28)
Width
12.5 mm (0.49)
Height
27.3 mm (1.08)
Weight (of servo itself)
9 g (0.32 oz)
Weight (including horns and screws)
15.1 g (0.53 oz)
Bottom View
Middle-Point (Stopped) Adjustment Potentiometer
We also carry an FS90R Compatible Wheel
Connector Pinout:
Resources:
FS90R Servo Datasheet
Arduino Servo Library Tutorials
Knob: control the servo's speed and direction of rotation with a potentiometer
Sweep: spins the servo's shaft one direction and then the other direction
Dimensions (units in mm)
Click on image to view full size
![](https://www.addicore.com/cdn/shop/files/ad624_L298N_MotorDriver_Back.jpg?v=1692330970&width=460)
Addicore Motors and Servos
This wheel is made specifically for use with the FS90R continuous rotation servo., The wheel is made of plastic and has a silicone tire for added
![](https://cdn.shopify.com/s/files/1/0675/8419/6925/t/3/assets/1689765967-30311677543_336103b7e9_o.jpg?v=1689765968)
Wheel for FS90R Servo (60x8mm)
![](https://www.addicore.com/cdn/shop/products/AD280-2.jpg?v=1689765736&width=600)
Addicore MPU9250 9-DOF 9-Axis Accel/Gyro/Magnetometer
![](https://cdn-shop.adafruit.com/970x728/2442-00.jpg)
Continuous Rotation Micro Servo [FS90R] : ID 2442 : $7.50 : Adafruit Industries, Unique & fun DIY electronics and kits
MINI REMOTE CONTROL SERVO : 5 packs FS90R RC servo is composed of PC plastic shell, POM gear, iron core shaft, light weight and small size. HIGH
![](https://m.media-amazon.com/images/I/71rWZVjfWHL._AC_UF350,350_QL80_.jpg)
FEETECH FS90R 360 Degree Continuous Rotation Micro Servo Motor 9g Servo for RC Helicopter Airplane Car Boat Robot Controls
![](https://m.media-amazon.com/images/I/61xPprUJxyL.jpg)
Wishiot Feetech FS90R Micro Servo 360 Degree Continuous Rotation RC Servo Motor 9g for Arduino Microbit Robotic Helicopter Airplane Boat : Toys & Games
![](https://www.elexp.com/cdn/shop/products/29FS90R-2_480x480.webp?v=1657544923)
FS90R Continuous Rotation Servo – Electronix Express
![](https://www.addicore.com/cdn/shop/files/ad639_RCRR2_Main.jpg?v=1693331052&width=4091)
Boffintronics RC Receiver Recorder II – Addicore
DIYmalls Feetech FS90R Micro Continuous Rotation Servo Analog Motor 360 Degree + RC Tire Wheel for Arduino Microbit Smart Car Robot (Pack
![](https://m.media-amazon.com/images/I/51XDAw6mvaL._AC_UF350,350_QL80_.jpg)
DIYmalls Feetech FS90R Micro Continuous Rotation Servo Analog Motor 360 Degree + RC Tire Wheel for Arduino Microbit Smart Car Robot (Pack of 2)
![](https://m.media-amazon.com/images/I/617X-1pGLWL._AC_UF894,1000_QL80_.jpg)
Geekstory FEETECH FS90R 360 Degree Continuous Rotation Micro Servo with RC Wheel Tire (4 Pack)
This feetech servo has CE & ROHS certificate. Servo Stall torque: 1.3kg.cm/18.09oz.in(4.8V), 1.5kg.cm/20.86oz.in(6V). Operating speed is 110RPM
![](https://m.media-amazon.com/images/I/61EtrkmH81L.jpg)
Geekstory Feetech FS90R 360 Degree Continuous Rotation Micro Servo Motor + RC Tire Wheel for Arduino Micro:bit (Pack of 4)
![](https://media-cdn.elecrow.com/media/catalog/product/1/_/1_20_2.jpg)
FS90R Micro Continuous Rotation Servo
![](https://m.media-amazon.com/images/I/61cgu4S6VTL.jpg)
FEETECH FS90R 360 Degree Continuous Rotation Micro Servo Motor 9g Servo for RC Helicopter Airplane Car Boat Robot Controls : Toys & Games
Datasheet FS90R, PDF, Servomechanism